To find information on your ADB remote, please use the tabs below to find exactly what you’re looking for.
If there is specific information that you are looking for that is not listed here, please contact us.
Program Your Remote
Searching for your device code? If your home entertainment device does not respond to your remote, try searching for your product codes.
To search for your code:
- Turn on Your TV
- On the remote control, press the “TV” button once; it will blink once. Then press and hold the “RCU SETUP” button until the “TV” button blinks twice.
- Type “9” “9” “1”. The “TV” button will blink twice.
- Aim the remote control at the TV and press the POWER button once.
- Press and release the “CH+” (channel UP) button continuously, then stop when your TV turns off.
(note: In the search mode, the TV button will blink while searching for the correct TV code.) - Press the RCU SETUP once to lock-in the code.
- Press the STB button once.
- Press the TV button once.
- Press the POWER button once. The TV set should turn on.
- To search for the codes of your other devices, repeat the previous steps, but substitute the appropriate key (“AUD,” “DVD” or “AUX”) for the device you are looking for.
Congratulations! You’ve programmed your remote control!
Program One-Touch Power
To turn on your TV and Set Top Box at the same time, use the instructions below. This will eliminate having to press more than the “Power” button to turn on your TV and Set Top Box.
- Press and hold RCU SETUP until the red light on your remote control blinks twice
- Press 9 9 5
- Press the POWER key
- Press TV then POWER then STB individually
- Press and hold RCU SETUP until the red light blinks twice
Entone Remote
Program Your Remote
Searching for your device code? If your home entertainment device does not respond to your remote, try searching for your product codes.
To search for your code:
- Power on the device and on the remote control, press the desired device key (TV,STS, AUX) once. Then press and hold “SETUP” until the device key blinks twice, and then release “SETUP.”
- Press the “POWER” key once and aim your new remote at the device.
- Press either “CHANNEL UP” key or “CHANNEL DOWN” key to do device auto-scan.
- In this search mode, the remote control will send IR codes from the library in 5 second intervals. The device key will be on and blink every 5 seconds while in the device scan mode.
- If the device turns off, a working code has been found. Press “OK” once to lock in the code. The selected mode key will blink twice.
- If all code sets of that device are exhausted in the search and the “OK” is not pressed, the selected device key will blink 7 times and the search mode will be terminated.
Congratulations! You’ve programmed your remote control!
Remote Does Not Work/Channels Change On Other TVs
If you are experiencing trouble with your Entone Remote control (you can’t toggle channels, AND/OR when you change channels on one TV and another TV changes, also), please see below.
Your Entone remotes are labeled 1, 2 and 3 on the battery cover. Each remote is assigned to a television, and will not work with any other television other than the one it is assigned. Each remote also has a channel that the associated television must be programmed to.
For Remote 1, the television must be tuned to channel 10. For Remote 2, the television must be tuned to channel 23, and for Remote 3, the television must be tuned to channel 39.
To change the channel that is programmed into your television, press the “TV” button on your remote, and then the correct channel associated with that remote (1=10, 2=23 and 3=39). Then, press the “STB” button on your remote to return to regular channel viewing.
**NOTE: If you have verified that your TV is on the correct channel, and you’re cable isn’t working, then press the “STB” button once then the “Power” button one time. If your cable still isn’t working, please call the Support Department at Cameron Communications.
153 West Dave Dugas Rd.
Sulphur, LA 70665 Phone: 337-583-2111 1-800-737-3900
Copyright 2021 American Broadband | All Rights Reserved | Designed and Developed by
